What P0476 means
P means powertrain (engine and transmission). The 0 marks a generic code defined by SAE, so the same number means the same thing across makes. The third character, 4, places it in the auxiliary emission controls subsystem; the last two digits identify the specific fault.
An exhaust pressure control valve (exhaust brake or warm-up valve) restricts the exhaust to build back-pressure for engine braking or faster warm-up, mostly on diesels. The engine computer controls and monitors it.
The letter "A" distinguishes between two or more of the same component on one vehicle. Which physical part is "A" is set by the manufacturer, so confirm it in the service information before replacing anything.
What “Range/Performance” means here
"Range/Performance" means the circuit is electrically intact — the signal sits inside its normal window — but the value does not make sense for the operating conditions. The module cross-checks it against what other inputs predict (a rationality test). That usually points at the exhaust pressure control valve itself or the system it measures, rather than at the wiring.
What you may notice
Symptoms depend on the vehicle and on how the module responds to the fault. Any of these can accompany P0476:
- Exhaust brake not working
- Slow warm-up
- Loss of power if stuck closed
Where to start diagnosing P0476
- Inspect the valve for soot binding and check it moves freely.
- Check the actuator's supply (vacuum, air or electric).
- Check connector and wiring.
Clear the code only after recording freeze frame data: it shows the engine speed, load and temperature at the moment the fault set, which is often the best clue to reproducing it.
Live data to watch
These standard OBD2 values relate to P0476. Support varies by vehicle; a value your car does not report will simply be missing.
| Value | What to look for |
|---|---|
| Exhaust pressure (PID 0x73) | Where supported. |
Related codes
Codes from the same exhaust pressure control valve family. If several are stored together, the shared part — wiring, a common reference voltage, or the component itself — is the place to start.
Further reading
Frequently Asked Questions
What does P0476 mean?
P0476 is the generic SAE J2012 code for "Exhaust Pressure Control Valve "A" Range/Performance". In plain terms, it means the engine computer has detected a "range/performance" fault on the exhaust pressure control valve.
Can I keep driving with P0476?
Drivable if the valve is open; a valve stuck closed restricts the engine.
What should I check first for P0476?
Inspect the valve for soot binding and check it moves freely.
Definition source: SAE J2012 / ISO 15031-6 generic DTC definitions. This is the generic meaning that applies across makes; a manufacturer can define a code more narrowly or add its own sub-codes, so confirm against the service information for your vehicle before replacing parts. Written by the OBDAssistant engineering team — see our editorial policy.